Acceptance Mark
Inicio - productos - Herramienta de diagnóstico carros - Opcom 2012V For Opel Firmware V1.59 Opel Diagnostic Tool with PIC18F458 Chip Support hardware update
« Regresar

Opcom 2012V For Opel Firmware V1.59 Opel Diagnostic Tool with PIC18F458 Chip Support hardware update

No. Artículo. SP105-B
4.8  6 reseñas
En stock
¡Cómpralo ya! (1 pcs):€16.50 
Cantidad:
  
Envío:
Elenvío gratuito   Standard Flat Rate Shipping Service 
Estimated delivery time: 7-15 working days.See details»
Weight:
126g
Package:
20cm*15cm*3cm      ( Inch:7.87*5.91*1.18 )
Devoluciones:
Return for refund within 7 days,buyer pays return shipping.Read details »
OPCOM 2012diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. OP-COM 2010 lets you read and clear fault codes, support many control units.This new opcom software version: 2012

Opcom 2012V Can OBD2 for Opel Firmware V1.59 with PIC18F458 chip
 
OPCom 2012 V Language: English

OPCOM 2012V Description:
VERSION: 2012
Firmware version: 1.59
OP-COM is a PC based diagnostic program.

Kindly Note. Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
 
OPCOM 2012 Function:

1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
 
OPCOM 2012 Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
 
You can also run output tests on many controllers:

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
Package list:

1. OP COM Interface
2. USB Cable
3. Software and Drivers CD

opcom fw 1.59 customers feedback
1) I did a quick test on Astra J 2013 year and it worked well. Connection to all modules.
In some of them there are only error reading but anyway it is a big progress since the 2010 version and a light at the and of a tunnel for future updates.
2) I try on astra-h working good firmware 1.45
3) Vectra B 2.0 dtl. All work.
4) corsa c z10 work ok
5) opel vivaro 2002 1.9dti work
6) work fine with Astra 2012, 2.0 diesel
7) opel vectra c 2004 all ok.
8) Woks Ok for me in all modules ,the program update firmware but all is ok
I made a diagnose on all controlers of a corsa c 2001 z10 xe. And work fine.
9) Tested on Vectra b and it’s working like a charm. 

Update clone Opcom firmware to 1.59 procedure
1): Download free 2014 op-com software, and install the program.
2010.08 opcom clone software Free download link:
http://pan.baidu.com/s/1kTvDJZT
2): Connect Op com 2014 china clone to the computer, and install the drivers correctly, Note: make sure disconnect the internet.
3): Open the OCflash and update the op-com with firmware 1.59 HEX file
4): Open the vaux-com software version is 2012.08, you can check opcom firmware version is upated to 1.59. 


Opcom 2012V software display:














Scan ESobdii QR code to order by mobile phone



Contact information:

 Telephone: +86-13407146587
 Skype : esobd2
 Whatsapp:+86-13407146587
 E-mail: sales@esobdii.com

If any problems, pls feel free to contact us.
Attention: Pls leave your telephone number for shipping arrival when you make payment for this product on our website

 
Escriba su opinión
* Clasificación:
    Por favor seleccione estrellas Evaluación.
* Primer nombre & Apellido:
* Su email:
* Detalle de comentario:
Dinos lo que opinas sobre este tema y compartir sus opiniones con otras personas. Por favor, asegúrate de que tu comentario se centre en este tema. Todos los comentarios son moderados y se revisará dentro de dos días hábiles. Evaluación inadecuada no serán publicados.
Después de las preguntas-venta y cuestiones: pon en contacto con nuestro Departamento de Servicio al Cliente.. (Un representante del cliente en contacto con usted).
Por favor entrar primero si desea modificar fuera de plazo o gestionar revisiones subido por ti mismo.
Maybe you also like ...
Opel Opcom OP-Com 2010V OBD2 diagnostic tool
€22.99
Product's Tags:   opel tool   OPCOM   free gift  
Bookmark It